configure eaps hello-pdu-egress

configure eaps name hello-pdu-egress [primary-port | secondary-port]

Description

Configures the port through which a master node sends EAPS hello PDUs.

Syntax Description

name Specifies the name of an EAPS domain.

Default

Default is the primary port.

Usage Guidelines

This command is provided for special network topologies that use spatial reuse and require that all EAPS hello PDUs travel in the same direction on the ring.

Note

Note

We recommend the default (primary-port) configuration for this command.

Example

The following command configures the master switch to send EAPS hello packets from the secondary port:

configure eaps "domain12" hello-pdu-egress secondary-port

History

This command was first available in ExtremeXOS 12.4.2.

Platform Availability

This command is available on all Universal switches supported in this document.

9039057-00 Rev AA